Air purification engineering refers to the removal of small particles, harmful air, bacteria and other pollutants in the air within a certain space, and the indoor temperature, cleanliness, pressure, air velocity and airflow distribution, noise, vibration and lighting, Projects where static electricity is controlled within a certain range of requirements. The room designed by the purification proj...

The dust-free workshop needs to be necessary. The dust-free purification workshop should install the air inlet system and the return air system of the dust-free purification workshop. People and goods entering the dust-free purification workshop must pass through the air shower, cargo shower, transfer window and other purification equipment. 1. The air inlet system should be installed in the dust-...

Clean Room (Clean Room), also known as clean room or clean room. It is the basis of pollution control. Without a clean room, it is impossible to mass-produce pollution-sensitive parts. This article only briefly discusses the four necessary conditions for achieving cleanliness requirements in clean room purification measures.  1. Air supply cleanliness To ensure that the cleanliness of the sup...

In factory production, when the workload of inoculation is very large, and it is necessary to work for a long time, the clean bench is an ideal equipment. The clean bench has the advantages of easy operation, more comfortable operation, high work efficiency, short preparation time, it can be operated for more than 10 minutes after booting, and can basically be used at any time. The power supply of...

More than 80% of the quality problems in the construction of epoxy wear-resistant floors and curing agent floors are caused by construction technology. Therefore, during the coating process, attention should be paid to the construction specifications and precautions, and the project management personnel should perform the construction on the construction site. The construction technology and engin...

As an important purification equipment in a clean room, the exhaust system has always played a core role in it. The following editor will give you a detailed introduction to 8 types of exhaust systems in clean rooms:  1. General exhaust system: General exhaust gas from production auxiliary rooms, living rooms, etc., generally does not need to be treated and directly discharged into the atmosp...

Operating room laminar flow air supply ceiling-clean air supply ceiling Operating room laminar flow air supply ceiling-clean air supply ceiling is the clean operating room, the purifying air supply end of the laminar flow ward, it has the functions of high efficiency filtration, flow sharing and air flow compensation. The rationality of the structure of the laminar flow purifying air supply ceilin...

The clean transfer window is a kind of auxiliary equipment for the clean room. It is mainly used to transfer small items between the clean area and the clean area, and between the clean area and the non-clean area to reduce the number of door openings in the clean room and make the clean room clean area. The pollution is reduced to a minimum. Features of clean transfer window:    1. The ...

1. Color steel sandwich panel Color steel sandwich composite board, referred to as color steel sandwich panel . It is made of sandwich material (flame retardant self-extinguishing polystyrene board, polyurethane material, gypsum board, rock wool board, paper honeycomb board, aluminum honeycomb board, etc.) using special high-strength glue and color steel plate surface layer composite, after heatin...

The fresh air and return air in the air supply system of the clean room air purification project are mixed in the air conditioning unit (AHU) of the air conditioning machine room, and then sent to the top of the clean room through the air supply pipe after a series of filtration and heat and humidity treatments , And then sent to the clean workshop after being filtered by a high efficiency filter ...