Overview:
The Laboratory sink(laboratory stainless steel wash table) is generally placed in the washing room. The table has a sink and faucet. During the experiment, the experimenter is provided with circulating water and special water for cleaning utensils and cleaning...
Product Origin:
ChinaShipping Port:
ShanghaiLead Time：
25Part 1--Introduction detail:
The laboratory stainless steel wash table is generally placed in the washing room. The table has a sink and faucet. During the experiment, the experimenter is provided with circulating water and special water for cleaning utensils and cleaning.Because needs to directly contact the residue of the reagent, so It needs to have a certain degree of anti-corrosion performance, most of which are made of PP or stainless steel.
Part 2--Precautions:
1. The water supply cut-off door of the sink must be pedal, elbow or automatic switch.
2. The sewer must be separated from the sewer pipe of the building and have obvious signs. The sewer must be disinfected.
3. The sink is for hand washing only, and no infectious materials are allowed to be poured inside.
4. The water supply pipe must be equipped with a backflow prevention device. Do not install floor drains in the laboratory.
5.The panel of the stainless steel sink must be thick to be strong and durable.
Part 3--Product picture:
 |
 |
 |
Overview: Fume hood is an indispensable kind of laboratory furniture. It has the function of exhausting and ventilating in the laboratory...
Overview: The laboratory table is the main component of the laboratory furniture, the main functional area of the laboratory, and the main working position of the laboratory personnel. Its quality and durability may directly affect the state of laboratory operations...
Overview: Laboratory cabinets include Laboratory lockers,reagent storage cabinets and wallcupboardetc.Laboratory lockers are different from ordinary household wardrobes and have stricter requirements on load-bearing capacity, moisture resistance, anti-slip, and corrosion resistance...
Overview: Clean room HPL door consists of a door panel made of HPL sandwich panels and an aluminum frame. Because HPL board has the characteristics of corrosion resistance, impact resistance, high temperature resistance and low temperature resistance, it is mainly used in pharmaceutical industry factories and chemical industry factories.
Overview: The right angle corner system is a partition wall and floor, partition wall and partition wall, the angle between the partition wall and the ceiling is 90 ° compartment system connection ways.
Overview: HPL wall system is composed of HPL panel, which is a high-tech green and environmentally-friendly decorative sheet. The surface is made of a special material and covered on the color layer...
Overview: Clean room aluminum frame door is the most widely used sliding door in clean room, It has the characteristics of beautiful appearance, high strength, good flatness,strong air tightness, heat insulation, good heat preservation and easy cleaning.
Overview: The clean room ceiling panel is an important part of the clean room system. It is usually used in clean room projects where the cleanliness level is relatively high, for example, Class 100, Class 1000, 100000. It is widely used in the electronics industry, chemical industry, military industry, etc. And it is also used in other industries...
Overview: Clean room sandwich panel are main products in clean room engineering, which is not only flame retardant, soundproof and environmentally friendly. The Clean room panel is made up of two layers of m...
Overview: Injection polyurethane panel is a new type of high-efficiency, energy-saving sandwich panel. The core material is filled by internal foaming and has good thermal insulation properties. It is widely used in the pharmaceutical industry, hospitals, food industry, chemical industry etc.
online service
+8613671979988
info@wonclean.com
+8613671979988
